Timer Controller DNC-T2003-T2032

The DNC-T2003 through DNC-T2032 timer controls are output sequencers with an adjustable ON TIME, OFF TIME, and LAST OUTPUT.  Upon application of power to the L1 and L2 terminals with the high-pressure switch contacts closed, the OFF TIME is initiated.  At the end of the preset OFF TIME, output 1 will turn on for the preset ON TIME. The control will cycle through all selected outputs until the high- and low-pressure switch contacts are opened. If the pressure switch contacts open during the ON TIME, the output will complete the active ON cycle. The next time the high-pressure switch is closed, the next output in the sequence is fired. Pressure monitoring with no hysteresis is achieved by using only a high-pressure switch. Placing a jumper across the high-pressure input forces the control to run continuously.

ADD THIS PRODUCT TO A REQUEST FOR QUOTE LIST ADD THIS PRODUCT TO A REQUEST FOR QUOTE LIST
ADD THIS PRODUCT TO A REQUEST FOR QUOTE LIST
Category: Tags: , , ,

Description

"*" indicates required fields

Name*
Address*
Department

Digital Timing Circuitry: Allows for stable timing from -40°F to 150°F temperature range

Pulse Time: Line synchronized to eliminate 8 milliseconds triac tum off variation

10 Amp-400/600V Output. Triacs: For maximum protection against output shorts. 200 VA load rating.

RTV Coating: Conformally coated for protection against vibration, humidity and contamination

2 Modes of Operation: Can be operated continuously or “on demand” via external pressure switch

Field Selectable: For numbers of outputs required

LED Indicators: For compartment being cleaned indication

Rugged Timing. Adjustments: Large stable potentiometers are used for “on” and “off” time adjustments

Metal Chassis Provided: For mounting directly into NEMA-4 box Timer Life Tested for 24-Hours: To eliminate field failures

Input Protection: 30 joule metal oxide varistor

Warranted to be free from defects in materials or workmanship for One Year from date of purchase

Made in USA