Pleated Bag Element Cartridge Collector

A Camcorp pleated bag element can be used for most applications where typical baghouse collectors are specified. The advantages of a pleated bag element collector are lower headroom requirements and higher efficiencies than standard baghouse dust collectors. Pleated bag elements are available in both top load and bottom/side load configurations in 100% spun-bonded polyester, PTFE-laminate spun-bonded polyester, food-grade, and high temperature. All of the same features and options are available in our line of pleated bag element dust collectors as are offered in our standard pulse jet baghouse dust collection line of products.

Camcorp’s qualified sales representatives will help you select the right size and configuration pleated bag element dust collector for your application.

Pleated Element Cartridge Collector
  • All welded heavy-duty construction
  • Housing rated for +/- 20” W.C. or as required
  • Standard materials of construction: carbon steel, stainless steel, or other alloys
  • Standard electricals: NEMA 4 timer and solenoid enclosures
  • Standard white or envirogreen 2-part epoxy
  • Structural supports
  • Service platforms
  • Explosion venting
  • Explosion proof electrical
  • Higher pressure/vacuum rating
  • Bin Vent style
  • Walk-in clean air plenum
  • Wide cartridge spacing
  • Customized paint

CAMCORP Company Overview

About CAMCORP Brochure

Stainless Steel Capabilities

Dust Collectors by CAMCORP

About CAMCORP dust collectors brochure

Baghouse Maintenance Guidelines

Dust Collector maintenance guidelines worksheet

Bottom Side Element Removal Design

Bottom removal cartridge collector drawing for CAMCORP models 3SFBH45x9 to 7SFBH84x63

Bottom Side Element Removal Design

Bottom removal cartridge collector drawing for CAMCORP models 8SFBH45x64-35P to 16SFBH84x256-45P

Bottom Side Element Removal Design

Bottom removal cartridge collector drawing for CAMCORP models 8SFBH45x64-35P to 16SFBH84x256-45P

Top Access Door Design

Top removal cartridge collector drawing for CAMCORP models 8SFTR45x64-35P to 16SFTR84x256-45P

Walk-In Clean Air Plenum Design

Walk in top removal cartridge dust collector drawing for CAMCORP models 8SFW145x64-35P to 16SFW184x256-45P

Top Access Door Design

Top removal cartridge collector drawing for CAMCORP models 8SFTR45x64-35P to 16SFTR84x256-45P

Top Access Door Design

Top removal cartridge collector drawing for CAMCORP models 3SFTR45x9-35P to 16SFTR84x63-45P

Walk-In Clean Air Plenum Design

Walk in top removal cartridge dust collector drawing for CAMCORP models 8SFW145x64-35P to 16SFW184x256-45P

Learn more about pleated bag element solutions for a wide range of industrial applications.

Seed Dust Processing

Read pleated bag element cartridge collector collecting seed dust project profile

Food Cereal Dust

Read pleated bag element cartridge collector collecting cereal dust project profile

Venting Mixer Chemical Calcium Carbonate

Read pleated bag element cartridge collector collecting calcium carbonate project profile

Plastic - Pellet Powder

Project profile featuring vacuum blower package and pleated element filter receiver

Tire Recycling

Read pleated bag element cartridge collector collecting ground rubber project profile

Tire Venting Gravity Tables Fine

Read pleated bag element cartridge collector collecting ground tire fines project profile
OTHER RELATED PRODUCTS
Vertical cartridge CAM-AIRO installed and painted white
VERTICAL CARTRIDGE CAM-AIRO™

A significant departure from less effective horizontal cartridge configurations.

Installed round filter receivers
ROUND FILTER RECEIVERS

Multiple options to choose from:  top bag, side bag, or walk-in clean air plenum access.

Medium pressure cartridge dust collector painted white
MEDIUM-PRESSURE CLEANING

Medium-pressure models use air compressed by means of a rotary lobe blower.

CAMCORP-parts
REPLACEMENT PARTS AND COMPONENTS

You won’t find a quicker response to your replacement parts requests anywhere else.

Request A Quote

First Name(Required)
Address(Required)
This field is for validation purposes and should be left unchanged.